How to make a pipe welding job look like a simple, quick DIY project?
We’ve all had the experience of a pipe job gone wrong – the pipe will have to be welded back together, but we never get a chance to clean the welded pipe thoroughly.
We’ve found a lot of work online to be more flexible than the standard welding method.
You can use a standard pipe wrench to weld the pipe back together and have a safe and quick DIY job, or you can make your own pipe weldon.
How to make pipe welling workWe’re going to use a simple pipe well stud and weld a pipe back onto a piece of pipe.
We’re using the standard pipe welding method.1.
Cut a length of pipe that is 3cm (1.5 inches) long.2.
Cut the length of the pipe that’s 3cm(1.7 inches) length.3.
Using the pipe wel, cut the length from the end of the welder to the middle of the stud.4.
Cut another length of tubing from the middle to the end and weld the remaining length of that pipe to the stud on both sides.5.
Thread the two ends together with the pipe pipe you just welded together.6.
Put the pipe through the welder and into a vise.7.
Take care to make sure the welt on the pipe fits snugly.8.
Take the pipe out of the vise and take a look at the weldon that has been made.9.
Now thread the pipe onto the pipe you welded on.10.
If the pipe is not already welded to the pipe, it will be.
This will be the pipe it will weld to.
This is a common issue.
If you have any questions about how to make the pipe welded properly, we’d love to hear from you.